BLUETTI AC180T Portable Power Station - 1,433.6Wh | 1800W

The BLUETTI AC180T Portable Power Station is a modular 1,433.6Wh LiFePO₄ energy solution designed for camping, caravanning, road trips, off-grid living, outdoor work, emergency preparedness and home backup. Equipped with two removable 716.8Wh B70 batteries, it delivers 1,800W of continuous pure sine wave AC output and supports selected resistive appliances up to 2,700W through Power Lifting Mode. With hot-swappable battery functionality, up to 1,440W AC charging, 500W solar input, seven versatile output ports, app-based monitoring and ≤20ms UPS switching, the AC180T provides flexible portable energy as part of the BLUETTI SwapSolar ecosystem.

Product Information

• Brand: BLUETTI
• Model: AC180T
• Product Type: Modular Portable Power Station
• Battery Capacity: 1,433.6Wh
• Included Battery Configuration: 2 × BLUETTI B70 Removable Batteries
• Individual Battery Capacity: 716.8Wh / 28Ah
• Battery Chemistry: LiFePO₄ / Lithium Iron Phosphate
• Battery Cycle Life: 3,000+ cycles to 80% original capacity
• Removable Battery Design: Yes
• Hot-Swappable Battery Support: Yes
• Rated AC Output with Two Batteries: 1,800W
• Rated AC Output with One Battery: 1,200W when operating without grid input
• Power Lifting Output: Up to 2,700W
• Surge Output: Up to 3,600W for approximately 1 second
• AC Output Voltage: 230V
• AC Output Frequency: 50Hz / 60Hz
• Inverter Type: Pure Sine Wave
• Maximum AC Charging Input with Two Batteries: 1,440W
• Maximum AC Charging Input with One Battery: 850W
• Maximum Solar Input: 500W
• Solar Input Range: 12V–60V DC, 10A maximum
• Maximum Combined AC and Solar Input: 1,940W with two batteries
• Maximum Combined AC and DC Output: 1,900W with two batteries
• Total Output Ports: 7 on the Australian model
• UPS Switching Time: ≤20ms
• Wireless Connectivity: Bluetooth
• App Support: BLUETTI App
• Pass-Through Charging: Supported
• Ecosystem Compatibility: BLUETTI SwapSolar MultiCooler and B70 battery system
• Warranty: 5 Years
• Compatibility Note: The AC180T provides full 1,800W output when two B70 batteries are installed or when supported by grid input. With one battery and no grid supply, AC output is limited to 1,200W.

Key Features & Benefits

• 1,433.6Wh Modular Battery Capacity: Two removable 716.8Wh B70 LiFePO₄ batteries provide a combined capacity of 1,433.6Wh for powering appliances, portable refrigeration, laptops, communication equipment, lighting and other compatible devices.
  
  
• Hot-Swappable Battery Design: The modular battery architecture allows a B70 battery to be removed or replaced while the other battery remains installed, helping extend runtime without shutting down compatible operating loads.
  
  
• 1,800W Continuous Pure Sine Wave Output: With two B70 batteries installed, the AC180T provides up to 1,800W of stable pure sine wave AC output for compatible household appliances, camping equipment, kitchen devices and electronics.
  
  
• 1,200W Single-Battery Operation: The AC180T can continue operating with one B70 battery installed, providing up to 1,200W of AC output when disconnected from grid power.
  
  
• Up to 2,700W Power Lifting Mode: Power Lifting Mode allows the AC180T to operate selected resistive heating appliances rated up to approximately 2,700W, including suitable hair dryers, heaters and electric kettles.
  
  
• Up to 3,600W Short Surge Support: The inverter can accommodate brief surge demand up to approximately 3,600W for one second, helping start compatible appliances with temporary peak-power requirements.
  
  
• Fast Dual-Battery Charging: Two installed B70 batteries can recharge to approximately 80% in around 60 minutes under suitable conditions, while a single B70 battery can reach approximately 80% in around 48 minutes.
  
  
• Up to 500W Solar Charging: Accepts up to 500W of solar input through a 12V–60V DC, 10A connection for renewable charging during camping, caravanning and off-grid use.
  
  

Seven Versatile Output Ports:
The Australian AC180T provides:

• 2 × 230V AC outlets

• 2 × 100W USB-C ports

• 2 × USB-A ports

• 1 × Regulated 12V car outlet

This output configuration allows several compatible AC, DC and USB devices to operate or recharge simultaneously.

• Dual 100W USB-C Power Delivery: Two USB-C ports provide up to 100W each for compatible laptops, tablets, smartphones, cameras, portable monitors and USB-C power banks.
  
  
• Regulated 12V Car Outlet: The 12V/10A cigarette lighter outlet supplies up to 120W for compatible portable refrigerators, air pumps, automotive accessories and camping equipment.
  
  
• BLUETTI SwapSolar Ecosystem: The removable B70 batteries can be shared between the AC180T and compatible BLUETTI MultiCooler products, allowing stored energy to be moved between portable power and refrigeration applications.
  
  
• Long-Life LiFePO₄ Batteries:
  The B70 battery modules use lithium iron phosphate chemistry designed for more than 3,000 charging cycles before reaching approximately 80% of their original capacity.
  
  
• AI-Powered Battery Management:
  The BLUETOPUS AI-BMS monitors battery temperature, voltage, current, charging, discharging and operating conditions to support safe and efficient energy management.
  
  
• ≤20ms UPS Protection:
  The AC180T can automatically transfer compatible connected devices to stored battery power within 20 milliseconds when the grid supply is interrupted.
  
  
• Bluetooth App Control: The BLUETTI app enables users to monitor battery capacity, individual battery status, input and output power, charging modes, system alerts and supported operating settings.
  
  
• Removable Batteries for Easier Handling: Each B70 battery weighs approximately 8.5kg and can be removed before transporting the main unit, reducing the weight that must be carried at one time.
  

Four Flexible Charging Methods:
The AC180T supports:

• AC wall charging

• Compatible solar-panel charging

• 12V or 24V vehicle charging

• Compatible AC-generator charging

Mechanical Specifications

• Product Type: Modular LiFePO₄ Portable Power Station
• AC180T Dimensions: 390 × 280 × 395mm
• Dimensions in Inches: 15.4 × 11.0 × 15.6in
• AC180T Weight with Two Batteries: Approximately 26.5kg / 58.4lb
• Individual B70 Battery Dimensions: 134 × 160 × 350mm
• Individual Battery Dimensions in Inches: 5.3 × 6.3 × 13.8in
• Individual B70 Battery Weight: Approximately 8.5kg / 18.7lb
• Battery Bays: 2
• Installation Type: Freestanding portable placement
• Carrying Design: Integrated carrying handles
• Battery Retention: Integrated locking latches
• Display Type: Integrated LCD status display
• Charging Temperature: 0°C to 40°C / 32°F to 104°F
• Discharging Temperature: -20°C to 40°C / -4°F to 104°F
• Storage Temperature: -20°C to 40°C / -4°F to 104°F
• Working Humidity: 10%–90%
• Water Resistance: Not waterproof
• Recommended Storage Charge: Approximately 40%–60%
• Long-Term Storage Maintenance: Complete a discharge-and-recharge cycle approximately every three months
• Recommended Installation Location: Dry, stable and properly ventilated indoor, vehicle or protected outdoor area

The AC180T should be positioned firmly on a stable surface and kept away from rain, standing water, excessive moisture, extreme heat and obstructed ventilation. Removing the B70 batteries before lifting may make transportation easier and safer.

Electrical Performance

Battery Specifications

• Total Battery Capacity: 1,433.6Wh
• Individual Battery Capacity: 716.8Wh / 28Ah
• Included Battery Quantity: 2
• Battery Model: BLUETTI B70
• Battery Chemistry: LiFePO₄ / Lithium Iron Phosphate
• Battery Cycle Life: 3,000+ cycles to 80% original capacity
• Battery Management: BLUETOPUS AI-BMS
• Battery Configuration: Removable and hot-swappable
• Supported Installed Batteries: One or two B70 batteries
• Output with Two Batteries: Up to 1,800W AC
• Output with One Battery: Up to 1,200W AC without grid input
• Battery Indicator: Five-level indicator on each B70 battery
• Separate Battery Power Button: Included on each B70 battery
• Standalone Battery Outputs: Not included on the B70 battery
• Compatible Secondary Product: BLUETTI MultiCooler within the SwapSolar ecosystem

The AC180T can operate with one or two B70 batteries. Maximum output and charging power are reduced when only one battery is installed.

AC Output Specifications

• Number of Australian AC Outlets: 2
• AC Output Voltage: 230V
• AC Output Frequency: 50Hz / 60Hz
• Rated AC Output with Two Batteries: 1,800W
• Rated AC Output with One Battery: 1,200W without grid input
• Australian AC Output Current: Up to 7.8A
• Inverter Type: Pure Sine Wave
• Surge Output: Up to 3,600W for approximately 1 second
• Power Lifting Output: Up to 2,700W for selected resistive appliances

Overload Performance:

• Approximately 1,890W–2,160W for up to 120 seconds

• Approximately 2,160W–2,700W for up to 10 seconds

• Approximately 2,700W–3,600W for up to 1 second

Maximum Combined AC and DC Output with Two Batteries: 1,900W

Maximum Combined AC and DC Output with One Battery: 1,200W

If combined output demand exceeds 1,900W while the AC load remains below 1,800W, the AC180T may disable DC output while maintaining compatible AC operation.

DC and USB Output Specifications

• USB-C Ports: 2
• Maximum USB-C Output Per Port: 100W
• Supported USB-C Voltages: 5V, 9V, 12V, 15V and 20V
• Standard USB-C Current: Up to 3A
• Maximum 20V USB-C Current: Up to 5A
• USB-A Ports: 2
• USB-A Output: 5V DC, 3A per port
• Car Outlet: 1 × Regulated 12V DC, 10A
• Maximum Car Outlet Output: 120W
• Maximum Combined DC Output: 365W
• Total Output Ports on Australian Model: 7

Input Specifications

• Maximum AC Charging Input with Two Batteries: 1,440W
• Maximum AC Charging Input with One Battery: 850W
• AC Input Voltage: 230V
• AC Input Frequency: 50Hz / 60Hz
• Maximum Australian AC Charging Current: 6.3A
• Maximum Australian AC Input Current: 9A
• Maximum Solar Input: 500W
• Solar Input Interface: XT60PM-M
• Solar Input Voltage Range: 12V–60V DC
• Maximum Solar Input Current: 10A
• 12V Vehicle Charging Input: Up to approximately 96W
• 24V Vehicle Charging Input: Up to approximately 192W
• Generator Charging: Supported through a compatible regulated AC generator
• Maximum Combined AC and Solar Input with Two Batteries: 1,940W
• Maximum Combined AC and Solar Input with One Battery: 1,080W

Charging Performance

• Single-Battery Charging to 80%: Approximately 48 minutes under suitable conditions
• Dual-Battery Charging to 80%: Approximately 60 minutes under suitable conditions
• Single-Battery Solar Charging: Approximately 2 hours with a continuous 500W input
• Dual-Battery Solar Charging: Approximately 4 hours with a continuous 500W input
• 12V Vehicle Charging Power: Up to approximately 96W
• 24V Vehicle Charging Power: Up to approximately 192W
• AC Charging: Supported
• Solar Charging: Supported
• Vehicle Charging: Supported
• Generator Charging: Supported
• Pass-Through Charging: Supported

Actual charging performance depends on:

• Number of installed B70 batteries

• Available AC or generator input

• Selected charging mode

• Solar-panel wattage

• Solar open-circuit voltage and current

• Sunlight intensity

• Weather and cloud conditions

• Panel orientation and angle

• Vehicle charging voltage

• Battery state of charge

• Battery and ambient temperature

• Connected loads during pass-through operation

• Cable condition and connection quality

Solar charging estimates assume a stable 500W input, strong sunlight, suitable panel positioning and minimal shading.

UPS and Operating Modes

• UPS Switching Time: ≤20ms
• UPS Function: Automatically transfers compatible connected equipment to battery power when grid electricity is interrupted
• Pass-Through Operation: Allows compatible appliances to receive power while the AC180T is charging
• Two-Battery Operating Mode: Provides up to 1,800W AC output
• Single-Battery Operating Mode: Provides up to 1,200W AC output without grid input
• Power Lifting Mode: Supports selected resistive appliances requiring up to approximately 2,700W
• Silent Charging Mode: Reduces charging power and operating noise for quieter charging
• Turbo Charging Mode: Enables the maximum supported AC charging rate
• Eco Mode: Automatically disables selected outputs when connected demand remains below the configured threshold
• Grid Self-Adaption Mode: Helps maintain charging from compatible weak or unstable AC sources
• Hot-Swap Operation: Allows one B70 battery to be replaced while the remaining battery supports compatible loads within the single-battery output limit
• App-Controlled Operation: Supported charging modes, output frequency, Eco Mode, Bluetooth settings and system information can be accessed through the BLUETTI app

The ≤20ms UPS function is suitable for many household electronics and appliances. Equipment requiring zero-transfer-time online UPS protection should be assessed separately.

Warranty Information

• Warranty: 5-Year Product Warranty
• Customer Support: BLUETTI Australia Customer Support
• Battery Cycle Rating: 3,000+ cycles to 80% original capacity
• Installation Requirement: Operate the AC180T according to the supplied user manual and stated electrical limits.
• Battery Requirement: Use only compatible BLUETTI B70 removable batteries.
• Appliance Requirement: Standard connected AC appliances must remain within the applicable 1,800W or 1,200W output limit based on the number of installed batteries.
• Power Lifting Requirement: Power Lifting Mode should only be used with suitable resistive appliances rated below approximately 2,700W.
• Solar Compatibility Requirement: Connected panels must provide a combined open-circuit voltage between 12V and 60V, no more than 10A and no more than 500W.
• Moisture Protection: The AC180T and B70 batteries are not waterproof and should not be exposed directly to rain, water or excessive humidity.
• Cold-Weather Charging: Do not recharge the batteries below 0°C.
• Battery Removal: Release the battery latch correctly and use the integrated handle when removing or installing a B70 battery.
• Storage Recommendation: Store the AC180T and batteries in a dry and ventilated location at approximately 40%–60% charge and cycle the batteries every three months.

Compatibility

• Compatible Standard AC Appliances: Devices operating within the applicable 1,800W or 1,200W continuous output limit
• Power Lifting Compatibility: Selected resistive heating appliances rated up to approximately 2,700W
• Compatible Solar Input: Solar panels providing 12V–60V open-circuit voltage, no more than 10A and no more than 500W
• Solar Connector Requirement: MC4-equipped solar panels used with the supplied BLUETTI solar charging cable

• Car Charging Compatibility: Compatible 12V and 24V vehicle cigarette lighter sockets

   

• Generator Compatibility: Compatible regulated AC generators providing the correct Australian voltage and frequency

   

• Mobile App Compatibility: BLUETTI App through Bluetooth

   

• UPS Compatibility: Household electronics and appliances that accept a transfer time of up to approximately 20ms

   

• Not Compatible With: BLUETTI expansion batteries that do not use the AC180T’s dedicated B70 removable-battery architecture

Compatible Removable Battery:

• BLUETTI B70 Battery Pack

Included Battery Quantity:

• 2 × B70 batteries for the 1,433.6Wh configuration

SwapSolar Ecosystem Compatibility:

• BLUETTI AC180T Portable Power Station

• Compatible BLUETTI MultiCooler portable refrigerator

Recommended Solar Configurations:

• 1 × Compatible BLUETTI 350W solar panel

• 1 × Compatible BLUETTI 500W solar panel

• 2 × Electrically compatible BLUETTI 200W solar panels

• Compatible third-party MC4 panels within the voltage, current and wattage limits

For safe operation, confirm the wattage, startup demand, voltage, current and connector specifications of every appliance, solar panel and charging source before connection.

Smart Energy Features

• Provides 1,433.6Wh of total modular battery capacity

• Includes two removable 716.8Wh B70 batteries

• Supports hot-swappable battery replacement

• Delivers 1,800W with two batteries installed

• Delivers 1,200W with one battery and no grid input

• Supports selected resistive appliances through 2,700W Power Lifting Mode

• Supports up to 3,600W of momentary surge output

• Provides two Australian 230V AC outlets

• Provides two 100W USB-C Power Delivery ports

• Provides two USB-A charging ports

• Provides one regulated 12V/10A car outlet

• Powers or charges up to seven compatible devices

• Supports up to 1,440W AC charging with two batteries

• Supports up to 850W AC charging with one battery

• Supports up to 500W solar charging

• Supports up to 1,940W combined AC and solar input

• Supports 12V and 24V vehicle charging

• Supports compatible regulated-generator charging

• Provides ≤20ms UPS switching

• Supports pass-through charging

• Uses long-life LiFePO₄ battery chemistry

• Provides more than 3,000 battery cycles

• Uses BLUETOPUS AI-powered battery management

• Supports Bluetooth app monitoring and control

• Supports Silent, Standard and Turbo charging modes

• Supports Eco Mode and Grid Self-Adaption Mode

• Integrates with the BLUETTI SwapSolar ecosystem

• Allows B70 batteries to be shared with a compatible MultiCooler

• Generates portable electricity without fuel, fumes or engine noise

Applications

• Camping and outdoor adventures

• Caravanning and RV travel

• Road trips

• BLUETTI MultiCooler battery support

• Portable refrigerator and freezer power

• Emergency preparedness

• Power outage backup

• Kitchen appliance operation

• Power tool operation

• Laptop and mobile workstation power

• Smartphone and tablet charging

• Camera and videography equipment

• CPAP and compatible medical-device backup

• Lighting and communication equipment

• Outdoor events

• Remote working

• Fishing and recreational activities

• Television and projector power

• Drone and rechargeable-tool batteries

• Home backup for essential appliances

• Vehicle and campsite power

• Workshop and job-site equipment

• Modular off-grid energy systems

Included Accessories

• BLUETTI AC180T Portable Power Station × 1

• BLUETTI B70 Removable Battery × 2

• AC Charging Cable × 1

• Car Charging Cable × 1

• Solar Charging Cable × 1

• Grounding Screw × 1

• User Manual × 1

• Warranty Card × 1

Optional Accessories

• USB-C-to-USB-C Output Cable

• 12V DC5521 Power Cable

• Compatible BLUETTI Portable Solar Panels

• Additional BLUETTI B70 Battery

• Compatible BLUETTI MultiCooler

Package contents may vary according to the selected bundle or supplied market version. Confirm that the product configuration includes two B70 batteries when purchasing the 1,433.6Wh AC180T package.

System Benefits When Paired with Compatible BLUETTI Solar Panels and MultiCooler

• Provides 1,433.6Wh of modular portable energy storage

• Delivers up to 1,800W of continuous AC power

• Supports selected resistive appliances through 2,700W Power Lifting Mode

• Allows individual B70 batteries to be removed and replaced

• Supports continued operation with one installed battery

• Allows B70 batteries to be shared between the AC180T and MultiCooler

• Extends portable refrigeration runtime through replaceable batteries

• Enables depleted MultiCooler batteries to be exchanged for charged batteries

• Supports up to 500W of renewable solar charging

• Recharges two B70 batteries to approximately 80% in around 60 minutes

• Provides seven outputs for compatible appliances and electronics

• Supports laptops through dual 100W USB-C ports

• Provides regulated 12V power for portable refrigeration and vehicle accessories

• Provides ≤20ms UPS backup during grid interruptions

• Supports pass-through charging for compatible continuous-use applications

• Provides Bluetooth monitoring through the BLUETTI app

• Uses durable LiFePO₄ battery technology for long-term operation

• Reduces the carrying weight when batteries are transported separately

• Supports camping, caravanning, emergency backup and remote-work applications

• Provides quiet and emission-free stored energy

• Allows users to add additional B70 batteries for extended SwapSolar operation

• Supports dependable off-grid use when paired with correctly specified solar panels, B70 batteries and compatible BLUETTI SwapSolar products

Contact PVtoEV for compatibility guidance and complete BLUETTI AC180T, B70 battery, MultiCooler, portable solar panel and charging-accessory recommendations.